ИЗДАТЕЛЬСКИЙ ДОМ «ЛИТЕЙНОЕ ПРОИЗВОДСТВО»
Издательский дом «Литейное производство» выпускает три специализированных научно-технических журнала с периодичностью: – «Литейное производство» и «Библиотечка литейщика» ежемесячно, «Металлургия машиностроения» – 1 раз в 2 месяца.
english version главная страница информация для рекламодателей заказать журналы
 
 
cover

Abstracts:

Gasik M.I., Podolchuk A.D., Derevyanko I.V., Ovcharuk A.N., Gatsuro V.M. Making Synthetic Irons on the ChargeContaining CSiC Materials UKKS
Described is the technology of making synthetic irons of various functional purposes in induction furnaces using complex metallurgical mixes of UKKS CSiC materials in foundries of the metallurgical and machine-building complexes. Key words: СSiC mixes, carbon-silicon carbide mix, silicon carbide, synthetic iron.

Ivanova V.A. Choosing Tests for Incoming Inspection of Foundry Coke Quality
There has been worked out an optimal list of incoming inspection tests for obtaining foundry coke quality characteristics depending on technological requirements and quality requirements. Key words: foundry coke, quality characteristics, foundry coke tests, test laboratory.

Kovtunov A.I., Khokhlov Y.Y. , Novsky I.V. The prospect of using magnesium for foam production
Existing methods of producing foam have significant disadvantages: low porosity and unstable performance of the process. Proposed method of forming porous articles of aluminum and magnesium, which are used for granules of a water soluble salt, provides the ability to control pore size and a sufficiently high productivity of the process. In this paper, the processes of formation of penomagniya impregnation liquid magnesium melt form with backfilling of the water-soluble salts. The results of studies of the physical - mechanical properties penomagniya obtained by the proposed technology. Key words: foam, water-soluble salts, filtration, granules, magnesium.

Ilyinsky V.A., Kostyleva L.V., Uryupin O.V. Application of the Resting Drop Method for a Qualitative Analysis of Heterogeneous Solidification
This article gives an analysis of the equilibrium of the gas, a drop of melt contain ng the germ of the solid phase, which rest on any solid substrate. The possibility by determining the wetting angle of molten refractory compounds to assess their ability to initiate heterogeneous nucleation during the crystallization Found that the greatest effect of heterogeneous nucleation of austenite and graphite can be expected on particles of carbides and nitrides of Zr and Ti, and inoculation by particles of SiO2, Al2O3 and Al in iron alloys are not observed Key words: method of stationary drops, heterogeneous nucleation, the wetting angle, inoculation, ironcarbon alloys.

Afanasiev V.K., Dolgova S.V., Lavrova N.B., Mazhitova, G.G. Popova M.V., Samon V.A. The influence of copper on the linear expansion of aluminum and silicon alloy
The regularities of the influence of copper on the linear expansion of aluminum and silicon alloy. It is established that the addition of copper reduces the coefficient of thermal expansion (FLR) high silicon silumins to low values. The paper discusses the prospects for the application of the alloys studied to replace the iron-nickel alloys with small and medium FLR. Key words: copper, aluminum alloys, silicon alloys, Invar, thermal expansion.

Bialobrzeski A., Saja K., Zmudzinska M. Studies of the Corrosion Behaviour of Selected Wrought Mg-Li Alloys
Analysis of literature and own research conducted at the Foundry Research Institute in Cracow and at the AGH Department of Non-Ferrous Metals under the EU Project № POIG.01.03.01-00-015/09 "Advanced materials and technologies for their production", " Task III.5.1 Ultralight profiles extruded from the new magnesium-lithium alloysindicate that the as-cast mechanical properties of Mg-Li alloys" are relatively low, which limits their practical use. However, subjected to plastic forming, these alloys show a huge potential as regards the opportunities of obtaining a growth in both mechanical ahd plastic properties. The presented results of corrosion studies of the as-cast Mg-Li alloys are a fragment of the ongoing work. Key words: magnesium alloys with lithium, resistance to high temperatures, corrosion resistance, die casting technology, plastic forming, corrosion behaviour.

Konokotin S.P., Moiseyeva N.S. Effect of Crystallization Method on the Structure of a Ni-Al Alloyafter High-Temperature Heating
Investigation into a cast Ni-Al alloy of the intermetallide class produced by electromagnetic treatment (EMT) during the equiaxial crystallization followed by hightemperature heating showed the presence of homogeneous phase distribution that provides high thermal stability beneficially influencingthe physical-and-mechanical properties of the alloy as compared to the single-crystal structure of the alloy obtained by the method of directional crystallization (DC). Key words: intermetallide alloy, crystallization methods, electromagnetic treatment, thermostable structure.

Khristenko V.V., Rudenko M.A., Kirievsky B.A. Effect of (Fe-Cr-C) addition composition on electrical conductivity of Cu-alloys at elevated temperatures
The temperature dependence of different composition monotectical strengthened copper-based Cu-(Fe-Cr-C) alloys electrical resistance has been investigated. Among the investigated alloys the best combination of mechanical properties and electrical conductivity at temperatures above 600°C has alloy obtained by adding to copper melt (Fe-Cr-C) addition containing 16 wt. % chromium and 1.4 wt. % carbon. Keywords: copper, dispersion strengthening, electrical conductivity, politerm of electrical resistance.

Nikitin K.V., Nikitin V.I., Amosov A.P. Cast Al Composites Reinforced and Modified with Nonmetallic Nanoparticles
The review of a current state of liquid-phase technologies of receiving the aluminum alloys reinforced by disperse nonmetallic particles is executed. The main tendencies in development of technologies for reinforcing and modifying of aluminum alloys by nanodimensional nonmetallic particles are shown. The main advantages of process of Self-Propogating High-Temperture Synthesis (SHS-process), as in-situ method, for preparation Aluminium matrix composites (AMCs) and master-alloys (AMCM-As) are designated. Physical ways of treatment of aluminum melts are the perspective and reasonable direction in technologies for preparation of AMCs. Key words: reinforcing, modifying, nanodimensional nonmetallic particles, liquid-phase methods, Aluminium matrix composites, Aluminium matrix composite master-alloys, SHS-process.

Grachov A.N., Leushin I.O. Choice of Variants of Using Anthropogenic Waste in Foundry-and-MetallurgyTechnologies
Actuality of industrial waste's treatment and utilization is considered in article. The plan ofindustrial waste's use in casting-metallurgy technologies is shown. The actions order of choosing varieties industrial waste's using in melting, sand mixing and coat's production is given. Key words: industrial waste, treatment and utilization, casting-metallurgy technologies, sand and core mix, coats.



Table of Content:

Gasik M.I., Podolchuk A.D., Derevyanko I.V., Ovcharuk A.N., Gatsuro V.M. Making Synthetic Irons on the ChargeContaining CSiC Materials UKKS

Ivanova V.A. Choosing Tests for Incoming Inspection of Foundry Coke Quality

Kovtunov A.I., Khokhlov Y.Y. , Novsky I.V. The prospect of using magnesium for foam production

Ilyinsky V.A., Kostyleva L.V., Uryupin O.V. Application of the Resting Drop Method for a Qualitative Analysis of Heterogeneous Solidification

Afanasiev V.K., Dolgova S.V., Lavrova N.B., Mazhitova, G.G. Popova M.V., Samon V.A. The influence of copper on the linear expansion of aluminum and silicon alloy

Bialobrzeski A., Saja K., Zmudzinska M. Studies of the Corrosion Behaviour of Selected Wrought Mg-Li Alloys

Konokotin S.P., Moiseyeva N.S. Effect of Crystallization Method on the Structure of a Ni-Al Alloyafter High-Temperature Heating

Khristenko V.V., Rudenko M.A., Kirievsky B.A. Effect of (Fe-Cr-C) addition composition on electrical conductivity of Cu-alloys at elevated temperatures

Nikitin K.V., Nikitin V.I., Amosov A.P. Cast Al Composites Reinforced and Modified with Nonmetallic Nanoparticles

Grachov A.N., Leushin I.O. Choice of Variants of Using Anthropogenic Waste in Foundry-and-MetallurgyTechnologies

Русская версия

Number 3, 2011      Number 5, 2013

To archive


© Литейное производство, 2015
e-mail:lp@niit.ru
Rambler's Top100