Mararenko K.V. On the Production of Mottled Cast Irons with Ausferritic Structure from Cast State
The way of manufacture carbidic austempered ductile iron, having tall strength and hard-wearing properties. The structure providing a high level of properties to products, is gained from a molten condition, due to overlapping processes of solidification and a heat treatment. The technology is distinguished with tall pliability and stability of results.
Key words: CADI, mottled cast iron, ausferrite, wear resistance, "hot" shakeout, isothermal hardening.

Afonaskin A.V. Investigation of Effect of Complex Cast Iron Inoculation on the Structure and Properties of Chill Castings
Complex inoculation improves the workability of chill castings, even those not heat treated.
Key words: complex inoculation, microstructure, ledeburitic cementite, chemical potential

Golubtsov V.A., Lunyov V.V. Inoculation of Steel Ingots and Castings
The article discusses issues of steel casting inoculation, choice of an inoculant is substantiated, and an approach to development of inoculation technology is proposed. An abstract of the book published by the authors dedicated to that subject is given.
Key words: inoculant, grain boundaries, nonmetallic inclusions, deoxidizing, ladle, metal stream

Vlasov А.А. Ways of strength rising of cores, which were produced by Resol CO₂-process
The basic methods of core making methods by cold boxes processes are resulted. Basic advantages of Resol CО₂-process are shown. Results of tests on increasing of strength properties of cores are shown.
Key words: cores, molds, phenol, resin, catalyst, hardening

Gorodchikov V.N., Demyanenko Y.V. Computer-Aided End-to-End Design Systems in NKMZ Foundry
The article describes a computer-aided end-to-end design system at NKMZ by an example of an intricate 22.5-ton steel casting. Results of using modern computer-aided means of both design and production of castings at the foundry are reported.
Key words: mathematical model, data base, life cycle of product, modeling, automation

Solykov D.A., Boldin A.N. Research of phenol gassing from the cores made by Hot-box and Cold-box-amin processes on the stage of moulds pouring
The article describes research of phenol gassing from the cores made by Hot-box and Cold-box-amin processes on the stage of moulds pouring. Key words: phenol, gassing, core, Hot-box, Cold-box-amin, moulds pouring

Rybkin V.A. Development Trends of Special Casting Process Technologies
The article discusses modern special casting production processes using self-spreading high-temperature synthesis, photopolymer material patterns, from composite materials.
Key words: exothermal reaction, reagent, laser stereolithography, photopolymer, composite materials, matrix, reinforcing phase, nanomaterials

Sapchenko I.G., Zhilin S.G., Evstigneev A.I. Preferences of application and peculiarities of projecting of press-accessory in process of porous investment pattern manufacturing in precision casting
Preferences of method of producing precision casts against porous investment patterns are under consideration at article. Such models are producing by press forming of powders of homogeneous and heterogeneous lost waxes with different flow rate. Variants of model shaping are given subject to elastic aftereffect, which arise at pressed material. Recommendations on press mold projecting for models production by method of model composition powder pressing are given.
Key words: lost wax powder, cast, dimensional-geometrical precision, press mold, porous, investment pattern

Levshin G.Y., Pavlyuk K.I. On the Thermophysical Characteristics of Magnetically Soft Molding Materials and Magnetic Molds
The reasons of unsatisfactory accuracy of definition of thermophysical characteristics magnetic soft forming materials and the magnetic mould, included in settlement formulas are considered and established. Linear mathematical models of their dependence on temperature are offered.
Key words: magnetic mould, magnetic soft forming materials, thermophysical properties, specific, heat capacity, heat conductivity, thermal receive, temperature conductivity.

Ivanko Е.К. То a question on bases of a centrifugal casting
In work are submitted, executed on the basis of laws of hydrodynamics, theoretical researches of factors of involving of liquid metal in rotation and his(its) movement in a ring stream. It is shown, that the ring stream of liquid metal in the rotated form represents the unsteady movement. Process of involving of liquid metal in rotation does not stop down to occurrence of a firm phase of metal.
Key words: centrifugal casting, hydrodynamics, liquid metal

Mararenko K.V. On the Production of Mottled Cast Irons with Ausferritic Structure from Cast State

Afonaskin A.V. Investigation of Effect of Complex Cast Iron Inoculation on the Structure and Properties of Chill Castings

Golubtsov V.A., Lunyov V.V. Inoculation of Steel Ingots and Castings

Vlasov А.А. Ways of strength rising of cores, which were produced by Resol CO2-process

Gorodchikov V.N., Demyanenko Y.V. Computer-Aided End-to-End Design Systems in NKMZ Foundry

Solykov D.A., Boldin A.N. Research of phenol gassing from the cores made by Hot-box and Cold-box-amin processes on the stage of moulds pouring

Finishing processing of surfaces of the details received by moulding under pressure

Rybkin V.A. Development Trends of Special Casting Process Technologies

Sapchenko I.G., Zhilin S.G., Evstigneev A.I. Preferences of application and peculiarities of projecting of press-accessory in process of porous investment pattern manufacturing in precision casting

Levshin G.Y., Pavlyuk K.I. On the Thermophysical Characteristics of Magnetically Soft Molding Materials and Magnetic Molds

Ivanko Е.К. То a question on bases of a centrifugal casting