ИЗДАТЕЛЬСКИЙ ДОМ «ЛИТЕЙНОЕ ПРОИЗВОДСТВО»
Издательский дом «Литейное производство» выпускает три специализированных научно-технических журнала с периодичностью: – «Литейное производство» и «Библиотечка литейщика» ежемесячно, «Металлургия машиностроения» – 1 раз в 2 месяца.
english version главная страница информация для рекламодателей заказать журналы
 
 
cover

Abstracts:

Ivanova V.A., Panov A.G. Peculiarities of Voluntary Certification of Inoculants
The article presents the procedure of voluntary certification of inoculants for metalmelts. Analysis of the existing base of norms and methods has been performed, and peculiarities of voluntary certification have been formulated.
Key words: Voluntary certification, inoculants, inoculation of melts, base of norms and methods.

Ten E.B., Drokin A.S., Aseev A.V. Researches of aluminum cast iron with spherilite graphite AL22D
At work it is presented the results of study the aluminum cast iron with globular graphite Al22D, in particullary6 phase transformation during crystallization of highly alloyed aluminumcast iron; dependent of graphite form in cast iron from oxygen activity in its melt; casting feeding parameters (raiser action distance LДП, distance of end effect LТЭ and total effective feeding distance L?) and effect of casting mold factor (sand and metal) on the structure of castings with different thickness.
Key words: Highly alloyed aluminum cast iron, phase transformation, crystallization, graphite form,oxygen activity, castings feeding parameters, structure, linear solidification rate.

Kondratyuk S.Ye., Stoianova E.N., Plyakhtur А.А., Parchomchuk Z.V. Structure and segregation of Р6М5Л steel in depending on conditions of crystallization
On the example of Р6М5Л steel the influence of the intensity of cooling during crystallization and subsequent solidification of the melt on the processes of structure formation and occurrence of segregation in the castings was studied. It is shown that with increasing cooling rate from 5 to 350°C/sec and 700°C/sec refining of the primary cast structure takes place, grain size is reduced, characteristics of the main alloying elements liquation is changing.
Key words: Steel, crystallization, cooling intensity, structure formation, settings of the dendrite structure, grain size, segregation.

Afanasyev V.K., Gertsen V.V., Gorshenin A.V., Dolgova S.V., Leis V.A., Khairullin P.Y. Making Al-Si Alloys Using Hydrogen and Silica
Proposed as a feedstock material for the preparation of alloys of Al–Si instead of crystallinesilicon used silicon dioxide (silica) and hydrogen. This approach to cooking aluminum-silicon alloys based on the concept of the leading role of hydrogen in determining the structure and properties of alloys and can significantly improve the mechanical properties at lower cost and adverse effects on the environment. Studied the microstructure, mechanical properties and thermal expansion of new synthetic aluminum alloys with silicon.
Keywords: Synthetic alloy of aluminum and silicon, hydrogen, silica, structure, mechanical properties, thermal expansion.



Table of Content:

Ivanova V.A., Panov A.G. Peculiarities of Voluntary Certification of Inoculants

Ten E.B., Drokin A.S., Aseev A.V. Researches of aluminum cast iron with spherilite graphite AL22D

Timofeyev A.M., Vilkinson D. Common Defects in High-Strength and Gray Iron. Typical Causes and Possible Solutions

Kondratyuk S.Ye., Stoianova E.N., Plyakhtur А.А., Parchomchuk Z.V. Structure and segregation of Р6М5Л steel in depending on conditions of crystallization

Zaltsman E.S., Urin S.L., Kravchenko T.A., Ivanyuk A.S. Examination of Ingot Molds for Special Steels

Afanasyev V.K., Gertsen V.V., Gorshenin A.V., Dolgova S.V., Leis V.A., Khairullin P.Y. Making Al-Si Alloys Using Hydrogen and Silica

Boiko V.V., Link T., Mikhalenkov K. Natural Ageing of Foundry Alloy AlMg5Si2Mn

T.V. Kozarevskaya, V.G. Yefremenko, A.P. Cheilyakh, K. Shimidzu, Y.I. Chernyavskaya Wear Resistance of Vanadium-Containing Irons when Being Worn by Abrasives of Different Hardness

V.N. Fikssen Pulsing Magnetic Field as an Effective Means of Physical Inoculating Al Alloys

V.A. Shcheretsky, A.S. Zatulovsky Effect of Complex Hardening on the Properties of Alumomatrix Composites

A.V. Ivanyk, V.M. Semyonov, V.D. Kassov On the Expediency of Using Electroslag Process in Heavy Engineering

Y.M. Kuskov, F.K. Biktagirov Making Wear-Resistant Bimetallic Products by Electroslag Hard-Facing

A.F. Vlasov, D.M. Vitsenko Effect of Heat Treatment on the Physical-and-Mechanical Properties of Electroslag Steel 34XH1M

A.D. Koshevoi, D.A. Volkov, A.A. Koshevaya Optimal Regimes of Heat Treating Hard-FacedTool for Tubing Stock Hot Pressing

D.M. Golub Improvement of Materials for Hard-Facing of Dies

N.A. Makarenko, I.O. Dyachenko Investigation into Capabilities of Plasma Welding and Hard-Facing

I.A. Shpareva, S.S. Zhizhchenko, P.G. Agraval, M.A. Turchanin Interaction of Liquid Aluminum with Casting ToolsMade of Steel and Iron

Metal-Expo’2013. to Keep up Balance in the Market

Русская версия

Number 6, 2013      Number 2, 2014

To archive


© Литейное производство, 2015
e-mail:lp@niit.ru
Rambler's Top100