Number 5, 2021
ИЗДАТЕЛЬСКИЙ ДОМ «ЛИТЕЙНОЕ ПРОИЗВОДСТВО»
Издательский дом «Литейное производство» выпускает два специализированных научно-технических журнала с периодичностью: «Литейное производство» – ежемесячно, «Металлургия машиностроения» – 1 раз в 2 месяца.
english version главная страница информация для рекламодателей заказать журналы
 
 
cover

Abstracts:

Malyarov A.I., Burtsev D.S., Baklanova E.M., Kondratev S.A. An influence of the charge quality on the specific energy consumption during melting in modern induction crucible furnaces
The article is devoted to the problems of reducing electricity consumption during melting in modern crucible furnaces. A method for evaluating the suitability of the charge for melting in such furnaces is proposed. The analysis of the results of melting using the proposed method is given.
Keyworlds: Induction furnaces, design, charge, melting.

Soifer V.M. On the application of acid-lined electric steel-making furnaces in mechanical engineering
The article provides general information on acid-lined electric steel furnaces, their advantages as compared to basic furnaces, as well as requirements to acid electric steel, information on the high durability of acid lining and an efficient technology for melting steel in acid furnaces. Attention is drawn to the choice of the type of melting units to be used in the steel workshops in the mechanical engineering industry.
Keywords: Acid electric furnace, silica, steel, slag, monolithic lining, melting, electrical energy, gas saturation, non-metallic inclusions, deoxidation treatment, charge, refractory property.

Tyutyukov S.A., Andreev A.V., Maurin N.I., Moiseev A.G., Kuznetsov M.N., Gavrilyuk A.V., Baykova N.A., Belozertsev M.V., Mardamshin A.V. Mechanical properties of low and medium alloy steels
There are discussed issues of increasing the level of mechanical properties of samples from Fe-0,3% C alloys and optimization their structure when varying: the contents of elements (Al, Si, Ni, Cr); modes of melting and thermal treatment of samples. In the context of reduced quality of charge materials, this task is of practical importance.
Keywords: Medium-carbon steel, structure, melting, heat treatment, mechanical properties.

Leushin I.O., Korovin V.A., Kurilina T.D. Treatment of copper alloys with alkaline earth metal carbonates
The possibility of treating copper alloys with carbonates of alkaline earth metals was studied. The results of this research showed the efficiency and prospects of refining and modifying brass melt with a mixture of carbonates.
Keywords: Copper alloys, carbonates, alkaline earth metals, pressure, temperature, refining and modifying treatment of the melt.

Marukovich E.I., Ilyushenko V.M., Anisovich A.G., Pumpur V.A., Duvalov P.Yu., Andrienko V.M. An effect of heat treatment on the mechanical properties of wear-resistant chromium iron
An influence of different conditions of heat treatment on the structure and mechanical properties of samples of IChKh18 iron was investigated. It is shown that the transformation of the iron microstructure during heat treatment is reduced mainly to a change in the size and shape of secondary carbides. Changes in the microstructure result in an increase in hardness, bending strength and wear resistance. The best mechanical properties of the samples are provided by thermal cycling, or by heating in a protective environment and air cooling.
Keywords: Wear-resistant iron, heat treatment, mechanical properties, structural configuration, phase composition.

Doroshenko V.S. Adaptation of molding and refining technologies for combining metal casting and heat treatment in the LTO process
The proposed methods of combining casting and heat treatment operations will reduce energy consumption and the cycle duration needed to produce heat-treated castings. Approaches to simulation of molding processes are described taking into account softening a sand mold to extract quickly a hot casting from it and the subsequent isothermal quenching of the casting to increase its mechanical properties. Isothermally hardened ductile iron (ADI quality) was used as an example.
Keywords: Casting cooling, heat treatment, iron-carbon alloys, isothermal hardening, ductile iron, ADI, LTO process, ferrite, austenite, bainite.

Lovshenko F.G., Marukovich E.I., Fedosenko A.S. Regularities of formation of mechanically alloyed heat-resistant composite powders and materials manufactured from them by additive technologies
The paper presents the results of the study of the main regularities of the formation of morphology, phase composition, structure and properties at all stages of the production of mechanically alloyed heat-resistant composite submicrocrystalline complex hardened powders based on iron and nickel, as well as materials (products) from them, obtained by additive technologies.
Keywords: Additive technologies, dispersion-hardened composite materials, reactive mechanical alloying, phase composition, microstructure, hardness, porosity.

Kovalko M.S., Volochko A.T., Ziziko A.V., Rubanik V.V. Structure and properties forming in ductile iron during isothermal hardening using ultrasound
The paper considers the possibility of intensifying isothermal holding processes during quenching of high-strength cast irons by using an external source of physical impact in the form of ultrasonic waves. Ultrasonic treatment of the salt melt during the cooling of the samples was carried out using an UZG 20-15 generator in cooperation with the ITA of NAS of Belarus. The mechanical properties and structure of the treated cast irons were determined both in the cast state and after isothermal quenching.
Keywords: Ductile iron, ultrasound, isothermal hardening, ausferrite, transformation, friction coefficient.



Table of Content:

Malyarov A.I., Burtsev D.S., Baklanova E.M., Kondratev S.A. An influence of the charge quality on the specific energy consumption during melting in modern induction crucible furnaces

Soifer V.M. On the application of acid-lined electric steel-making furnaces in mechanical engineering

Tyutyukov S.A., Andreev A.V., Maurin N.I., Moiseev A.G., Kuznetsov M.N., Gavrilyuk A.V., Baykova N.A., Belozertsev M.V., Mardamshin A.V. Mechanical properties of low and medium alloy steels

Leushin I.O., Korovin V.A., Kurilina T.D. Treatment of copper alloys with alkaline earth metal carbonates

Marukovich E.I., Ilyushenko V.M., Anisovich A.G., Pumpur V.A., Duvalov P.Yu., Andrienko V.M. An effect of heat treatment on the mechanical properties of wear-resistant chromium iron

Doroshenko V.S. Adaptation of molding and refining technologies for combining metal casting and heat treatment in the LTO process

Lovshenko F.G., Marukovich E.I., Fedosenko A.S. Regularities of formation of mechanically alloyed heat-resistant composite powders and materials manufactured from them by additive technologies

Kovalko M.S., Volochko A.T., Ziziko A.V., Rubanik V.V. Structure and properties forming in ductile iron during isothermal hardening using ultrasound

Русская версия

Number 4, 2021      Number 6, 2021

To archive


© Литейное производство, 2021
e-mail:liteinoe2006@yandex.ru